Designed for Demanding Studio and Home Applications

The airmotiv 6 was designed for applications that demand accurate full range sound, exceedingly low distortion, great imaging, and consistent performance. The airmotiv 6 is equally at home in a professional recording studio or in a top notch home studio, and can also be used directly with a DAC, preamp, or surround processor to create a truly impressive small audiophile system or a great home-theater setup.

Superior Transducer Technology with Precision Matching

Our exclusive airmotiv high-frequency transducer provides crystal clear, extended highs--even extending comfortably above the range of human hearing. At the same time, a powerful, precision-engineered airmotiv low-frequency transducer delivers crisp solid bass without any of the thinness or thump that plague other small speakers.

The high-frequency gain, low-frequency gain, and overall gain of each unit are calibrated to within 1.0 dB of our reference standard, which allows every pair to deliver stunning imaging and pinpoint placement of instruments in the sound stage, and ensures that any units you buy in the future will be an exact match for the ones you already have.

Bi-Amplified, Full-Featured Powerhouse

All of our airmotiv monitors are fully bi-amplified, with a separate amp for both the woofer and high-frequency transducer. The airmotiv 6s offer 210 watts per channel of power. Each amplifier is audiophile-grade, with toroid transformer, large electrolytic power capacitors, and stacked metalized film capacitors used throughout.

Plus, we haven't skimped on the features. Use either balanced or unbalanced inputs, tweak the response to your studio or room with active crossover controls, enjoy the convenience of 115V/230V user-switchable AC power, and relax with the confidence of full overdrive protection.

• Frequency Response
• 43 Hz to 23 kHz +/- 1.7 dB
• 40 Hz to 26 kHz +0 / -6 dB
• Input Connectors
• One single ended (RCA)
• One professional balanced (XLR)
• Bass Alignment
• Single rear-oriented port (slot loaded)
• Power Source
• 120 VAC 50/60 Hz +/- 10% or
  230 VAC 50/60 Hz +/- 10%
• IEC standard removable power cord
• Size (each)
• 340 mm high x 214 mm wide x 286 mm deep
  (13.4" high x 8.4" wide x 11.3" deep)
• Size (pair, packaged)
• 415 mm long x 340 mm wide x 485 mm high
  (16.3" high x 13.4" wide x 19.1" high)
• Weight (net):
• 24.25 lbs. (11 kg) each
• Weight (packaged):
• 29.5 lbs. (13.4 kg) each

• Driver Complement
• One 32 x 60 mm airmotiv high-frequency folded-ribbon transducer
• One 165 mm (6.5 inch) airmotiv low-frequency transducer with Curv® polypropolene composite cone structure
• Amplification
• Total amplifier power:
  210 watts RMS
  
  
• High-frequency amplifier:
  100 watts RMS; S/N > 100 dB; THD+N < 0.05% @ 20W, 10 kHz
  
  
• Low-frequency amplifier:
  110 watts RMS; S/N > 100 dB; THD+N < 0.05% @ 100W, 100 Hz
• Adjustments and Calibrations
• High frequency tilt control:
  4 kHz hinge frequency; 0 (calibrated), +2 dB, -2 dB @ 20 kHz
  
  
• Low frequency shelving control:
  150 Hz turnover frequency; 0 (calibrated), -2 dB, -4 dB @ 20 Hz
  
  
• HF gain, LF gain, and overall gain calibrated to standard within 1.0 dB
• Crossover
• Precision multi-pole phase compensated fully active crossover
• Crossover frequency: 2500 Hz
• Mounting
• The airmotiv 6 has mounting points on the bottom for use with our (optional) mounting bracket.

• Recommended Uses:
• As a monitor in a professional studio or high-end home studio
• Directly with a DAC or preamp in a mid-sized audiophile system
• As a main speaker (with a sub-woofer) in a high-end audiophile system
• As a main speaker for a small high-end surround sound system
• As a main or surround speaker in an audiophile home-theater system

Frequency Response Plots